 | | | -none- | -none- 2007-10-08 - By Frank Bottone
Back
Baron,
Thanks for the quick response. I do have the binlogs still on the
master, so I should be able to do that - however I saw a post somewhere
(lost the link at this time) saying that resetting the slave will drop
any temporary tables which could cause issues. I'm not sure at this
point if that would affect me or not. It is definitely worth a shot I
guess, since worst case I will still need to resync from the master.
I will try this and give the checksum tool a try as well (although, I
think I might have crippled myself from the earlier issues we've been
having. They only occurred in a spam-related table and we were able to
prove out that the messages were clearly spam and could be left out of
the slave/backup by just skipping that transaction. The issue was
happening frequently enough that digging through the binlogs to get the
query to manually replicate became more effort than it was worth, so the
systems might be slightly out of sync. Perhaps I can just ignore the
checksum differences for that particular table...
I'll let you know the results.
Thanks,
Frank
Baron Schwartz wrote:
> Frank,
>
> Frank Bottone wrote:
>> I've been having trouble with my master/slave server - recently I was
>> having a few repeated issues where the mysql slave would stop due to
>> "invalid sql syntax", but the queries executed fine on the master. I
>> would have to manually dig through the logs and then find the query
>> to manually execute on the slave, then use skip_counter to resume the
>> replication skipping the corrupted statement on the slave. I thought
>> it might be hardware related since it was only affecting the slave,
>> so I moved it to a different blade (both the servers are blades).
>>
>> However, today I was greeted with a nagios alert that the slave had
>> stopped again. This time, it seems like the relay log is definitely
>> corrupt. I was able to run mysqlbinlog > /dev/null on all the master
>> logs, none are corrupt (including the one it had read up to on the
>> slave). The relay log on the slave is though - it reports
>> "[root@(protected) mysql]# mysqlbinlog mysql02-relay-bin.010923 > /dev/null
>> ERROR: Error in Log_event::read_log_event(): 'read error', data_len:
>> 38210134, event_type: 0
>> Could not read entry at offset 618730:Error in log format or read error"
>>
>> _Nothing too much different in the logs either:
>>
>> _071006 11:18:52 [Note] Slave I/O thread: connected to master
>> 'replica@(protected)
>> 4:3306', replication started in log 'mysql-bin.000104' at position
>> 906124600
>> 071008 9:07:12 [ERROR] Error reading packet from server: Lost
>> connection to MySQL server during query ( server_errno=2013)
>> 071008 9:07:13 [Note] Slave I/O thread: Failed reading log event,
>
> ... snip ...
>
>> their names by issuing 'SHOW SLAVE STATUS' on this slave. Error_code: 0
>> 071008 12:15:33 [ERROR] Error running query, slave SQL thread
>> aborted. Fix the problem, and restart the slave SQL thread with
>> "SLAVE START". We stopped
>> at log 'mysql-bin.000105' position 893425700
>>
>>
>> Any help or ideas tracking this down would be appreciated - I think
>> we are going to have to take down the production database to resync
>> the two and get replication going again. We mainly use the replica
>> for backup purposes in order to avoid downtime during the backup and
>> in the event of a hardware issue with the master.
>
> No need to take down the master or re-initialize the slave, given what
> I've seen so far. Just tell the slave to throw away its relay logs
> and re-fetch from the master. From the output you showed,
>
> CHANGE MASTER TO MASTER_LOG_FILE='mysql-bin.000105',
> MASTER_LOG_POS=893425700;
>
> This will discard the relay logs and re-fetch them. As long as that
> master log hasn't been purged on the master, you might be OK.
>
> You might want to take a look at mysql-table-checksum. Your data
> could be fine, but it might also be different on the slave. But
> there's no need to worry about it until you prove it:
>
> http://mysqltoolkit.sourceforge.net/
>
> Your corruption in the relay logs could be caused by any number of
> things -- bad network, bad hardware, software bug... You could add
> your voice to an outstanding bug request:
>
> http://bugs.mysql.com/bug.php?id=25737
>
> Hope that helps
> Baron
>
--
The sender of this email subscribes to Perimeter eSecurity's email
anti-virus service. This email has been scanned for malicious code and is
believed to be virus free. For more information on email security please
visit: http://www.perimeterusa.com/email-defense-content.html
This communication is confidential, intended only for the named recipient(s)
above and may contain trade secrets or other information that is exempt from
disclosure under applicable law. Any use, dissemination, distribution or
copying of this communication by anyone other than the named recipient(s) is
strictly prohibited. If you have received this communication in error, please
delete the email and immediately notify our Command Center at 203-541-3444.
Thanks
--
MySQL General Mailing List
For list archives: http://lists.mysql.com/mysql
To unsubscribe: http://lists.mysql.com/mysql?unsub=mysql@(protected)
|
|
|