 | | | Subject: Re: using archive_stage und archive_stage_repeat in scripts | Subject: Re: using archive_stage und archive_stage_repeat in scripts 2007-08-20 - By Frank
Back
Hello Tilo,
below the backint-output-part. It seems the output is empty. I can
send you the complete file.
best Regards
Frank
Copying output of Backint for MaxDB to this file.
-- ---- -- Begin of output of Backint for MaxDB
(/sapdb/ALI/sapbackup/backint/backint.out)-- ---- --
********************************************************************************
Program: /sapmnt/AAI/exe/backint 4.5FP_3GA
Input File: /sapdb/ALI/sapbackup/backint/backint.inp
Profile: /sapdb/ALI/sapbackup/backint/initALI.utl
Function: BACKUP
Backup Type: BACKUP_FILE
********************************************************************************
********************************************************************************
-- ---- -- End of output of Backint for MaxDB
(/sapdb/ALI/sapbackup/backint/backint.out)-- ---- --
Removed Backint for MaxDB's temporary output file
'/sapdb/ALI/sapbackup/backint/backint.out'.
Copying error output of Backint for MaxDB to this file.
-- ---- -- Begin of error output of Backint for MaxDB
(/sapdb/ALI/sapbackup/backint/backint.err)-- ---- --
-- ---- -- End of error output of Backint for MaxDB
(/sapdb/ALI/sapbackup/backint/backint.err)-- ---- --
Removed Backint for MaxDB's temporary error output file
'/sapdb/ALI/sapbackup/backint/backint.err'.
Removed the Backint for MaxDB input file
'/sapdb/ALI/sapbackup/backint/backint.inp'.
Copying pipe2file output to this file.
-- ---- -- Begin of pipe2file output
(/tmp/temp1187627401-0)-- ---- --
-- ---- -- End of pipe2file output
(/tmp/temp1187627401-0)-- ---- --
Removed pipe2file output '/tmp/temp1187627401-0'.
Copying pipe2file error output to this file.
-- ---- -- Begin of pipe2file error output
(/tmp/temp1187627401-1)-- ---- --
-- ---- -- End of pipe2file error output
(/tmp/temp1187627401-1)-- ---- --
Removed pipe2file error output '/tmp/temp1187627401-1'.
Have finished clean up successfully.
The backup of stage file '/sapdb/ALI/saparch/LCLOG.719' was
unsuccessful.
2007-08-20 18:31:03
Cleaning up.
On Mon, 20 Aug 2007 19:15:42 +0200, tilo.heinrich@(protected) ("Heinrich,
Tilo") wrote:
>Hello Frank,
>
>So pipe2file gets killed, because "sapmnt/AAI/exe/backint" finished with an
error. Somewhere below in dbm.ebl you should find the output of backint. Maybe
that gives us a hint, why the backups fail.
>
>Best regards,
>Tilo Heinrich
>Senior Developer
>MaxDB&liveCache
>SAP AG
>http://www.sap.com
>
>Sitz der Gesellschaft/Registered Office: Walldorf, Germany
>Vorstand/SAP Executive Board: Henning Kagermann (Sprecher/CEO), Shai Agassi, L
?o Apotheker, Werner Brandt, Claus Heinrich, Gerhard Oswald, Peter Zencke
>Vorsitzender des Aufsichtsrats/Chairperson of the SAP Supervisory Board: Hasso
Plattner
>Registergericht/Commercial Register Mannheim No HRB 350269
>
>Diese E-Mail kann Betriebs- oder Gesch?ftsgeheimnisse oder sonstige
vertrauliche Informationen enthalten. Sollten Sie diese E-Mail irrt?mlich
erhalten haben, ist Ihnen eine Kenntnisnahme des Inhalts, eine Vervielf?ltigung
oder Weitergabe der E-Mail ausdr?cklich untersagt. Bitte benachrichtigen Sie
uns und vernichten Sie die empfangene E-Mail. Vielen Dank.
>
>This e-mail may contain trade secrets or privileged, undisclosed, or otherwise
confidential information. If you have received this e-mail in error, you are
hereby notified that any review, copying, or distribution of it is strictly
prohibited. Please inform us immediately and destroy the original transmittal.
Thank you for your cooperation.
>
>
>-- --Original Message-- --
>From: Frank
>Sent: Montag, 20. August 2007 18:49
>To: maxdb@(protected)
>Subject: Re: using archive_stage und archive_stage_repeat in scripts
>
>Hello Tilo,
>
>below a part of dbm.ebl
>The period from start Pipe2file till kill pipe2file seems always about
>60 sec.
>
>best Regards
>
>Frank
>
>
>-- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- -----
-- ---- ---- ---- ---
> Constructed pipe2file call 'pipe2file -d file2pipe -f
>/sapdb/ALI/saparch/LCLOG.719 -p /sapdb/ALI/saparch/BACKINT_LOG_PIPE
>-nowait'.
>
> Starting pipe2file for stage file '/sapdb/ALI/saparch/LCLOG.719'.
> Starting pipe2file process 'pipe2file -d file2pipe -f
>/sapdb/ALI/saparch/LCLOG.719 -p /sapdb/ALI/saparch/BACKINT_LOG_PIPE
>-nowait >>/tmp/temp1187627401-0 2>>/tmp/temp1187627401-1'.
> Process was started successfully.
> Pipe2file has been started successfully.
>
> Starting Backint for MaxDB.
> Starting Backint for MaxDB process '/sapmnt/AAI/exe/backint -u
>ALI -f backup -t file -p /sapdb/ALI/sapbackup/backint/initALI.utl -i
>/sapdb/ALI/sapbackup/backint/backint.inp -c
>>>/sapdb/ALI/sapbackup/backint/backint.out
>2>>/sapdb/ALI/sapbackup/backint/backint.err'.
> Process was started successfully.
> Backint for MaxDB has been started successfully.
>
> Waiting for end of the backup operation.
> 2007-08-20 18:30:01 The backup tool is running.
> 2007-08-20 18:30:01 Pipe2file is running.
>
> 2007-08-20 18:30:02 The backup tool process has finished work
>with return code 2.
>
> 2007-08-20 18:30:06 Pipe2file is running.
>
> 2007-08-20 18:30:16 Pipe2file is running.
>
> 2007-08-20 18:30:31 Pipe2file is running.
>
> 2007-08-20 18:30:51 Pipe2file is running.
>
> Killing not reacting pipe2file process.
> Pipe2file killed successfully.
>
> 2007-08-20 18:31:03 The pipe2file process has finished work
>with return code -1.
> The backup operation has ended.
>-- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- -----
-- ---- ---- ---- ------
>
>
>On Mon, 20 Aug 2007 17:13:54 +0200, tilo.heinrich@(protected) ("Heinrich,
>Tilo") wrote:
>
>>Hello Frank,
>>
>>I do not remember pipe2file having any timeout. What do you see exactly in
dbm.ebl?
>>
>>Best regards,
>>Tilo
>>
>>Tilo Heinrich
>>Senior Developer
>>MaxDB&liveCache
>>SAP AG
>>http://www.sap.com
>>
>>Sitz der Gesellschaft/Registered Office: Walldorf, Germany
>>Vorstand/SAP Executive Board: Henning Kagermann (Sprecher/CEO), Shai Agassi,
L?o Apotheker, Werner Brandt, Claus Heinrich, Gerhard Oswald, Peter Zencke
>>Vorsitzender des Aufsichtsrats/Chairperson of the SAP Supervisory Board:
Hasso Plattner
>>Registergericht/Commercial Register Mannheim No HRB 350269
>>
>>Diese E-Mail kann Betriebs- oder Gesch?ftsgeheimnisse oder sonstige
vertrauliche Informationen enthalten. Sollten Sie diese E-Mail irrt?mlich
erhalten haben, ist Ihnen eine Kenntnisnahme des Inhalts, eine Vervielf?ltigung
oder Weitergabe der E-Mail ausdr?cklich untersagt. Bitte benachrichtigen Sie
uns und vernichten Sie die empfangene E-Mail. Vielen Dank.
>>
>>This e-mail may contain trade secrets or privileged, undisclosed, or
otherwise confidential information. If you have received this e-mail in error,
you are hereby notified that any review, copying, or distribution of it is
strictly prohibited. Please inform us immediately and destroy the original
transmittal. Thank you for your cooperation.
>>
>>
>>-- --Original Message-- --
>>From: Frank
>>Sent: Freitag, 17. August 2007 18:18
>>To: maxdb@(protected)
>>Subject: Re: using archive_stage und archive_stage_repeat in scripts
>>
>>Hello Tilo,
>>
>>As I see in dbm.ebl or *.ssa it seems that the pipe2file-cmd timed
>>out. This happens only one or two times a day likely because highload
>>of the backup-Server.
>>
>>Is there any way to avoid this situation or change the timeout-value
>>for the pipe2file-cmd
>>
>>Best Regards Uwe
>>
>>
>>On Fri, 27 Jul 2007 18:00:31 +0200, tilo.heinrich@(protected) ("Heinrich,
>>Tilo") wrote:
>>
>>>Hello Frank,
>>>
>>>One option would be to put the archive_stage* commands into an additional
file and use the '-i <input_file>' option of dbmcli. In this case dbmcli would
not execute the archive_stage_repeat, if the archive_stage had already failed
(at least, this is stated by http://maxdb.sap.com/currentdoc/84
/5b0282467f11d4aa1100a0c9430730/frameset.htm <http://maxdb.sap.com/currentdoc/84
/5b0282467f11d4aa1100a0c9430730/frameset.htm> ).
>>>
>>>Best regards,
>>>Tilo
>>>
>>>Tilo Heinrich
>>>Senior Developer
>>>MaxDB&liveCache
>>>SAP AG
>>>http://www.sap.com <http://www.sap.com/>
>>>
>>>Sitz der Gesellschaft/Registered Office: Walldorf, Germany
>>>Vorstand/SAP Executive Board: Henning Kagermann (Sprecher/CEO), L?o
Apotheker (stellvertretender Sprecher/Deputy CEO), Werner Brandt, Claus
Heinrich, Gerhard Oswald, Peter Zencke
>>>Vorsitzender des Aufsichtsrats/Chairperson of the SAP Supervisory Board:
Hasso Plattner
>>>Registergericht/Commercial Register Mannheim No HRB 350269
>>>
>>>Diese E-Mail kann Betriebs- oder Gesch?ftsgeheimnisse oder sonstige
vertrauliche Informationen enthalten. Sollten Sie diese E-Mail irrt?mlich
erhalten haben, ist Ihnen eine Kenntnisnahme des Inhalts, eine Vervielf?ltigung
oder Weitergabe der E-Mail ausdr?cklich untersagt. Bitte benachrichtigen Sie
uns und vernichten Sie die empfangene E-Mail. Vielen Dank.
>>>
>>>This e-mail may contain trade secrets or privileged, undisclosed, or
otherwise confidential information. If you have received this e-mail in error,
you are hereby notified that any review, copying, or distribution of it is
strictly prohibited. Please inform us immediately and destroy the original
transmittal. Thank you for your cooperation.
>>>
>>>-- --Original Message-- --
>>>From: Frank
>>>Sent: Freitag, 27. Juli 2007 14:12
>>>To: maxdb@(protected)
>>>Subject: Re: using archive_stage und archive_stage_repeat in scripts
>>>
>>>Helle Tilo,
>>>
>>>sorry that I didn't explain the error-situation.
>>>
>>>if the backup-infrastructure (tape_changer,robots, Mediaserver etc)
>>>has to work on a high load the responsetime of the external backup
>>>program is higher then the TIMEOUT...-Parameter in bsi.env
>>>So the first archive_step fails
>>>Now the second archive_step can run ok and we have only 1 copy of the
>>>logfile.
>>>
>>>I increased the TIMEOUT...-Parameter in bsi.env to 300 sec. Now we
>>>have nearly no errors.
>>>
>>>The last error seems not covered from the timeout-Parameter because
>>>" The pipe2file process has finished work with return
>>>code -1." after 1 min 03 sec
>>>
>>>I will send you the dbm.ebl.
>>>
>>>Best Regards
>>>Frank
>>>
>>>
>>>
>>>On Wed, 25 Jul 2007 14:51:08 +0200, tilo.heinrich@(protected) ("Heinrich,
>>>Tilo") wrote:
>>>
>>>>Hello Frank,
>>>>
>>>>Does log file dbm.ebl contain any information about such an error situation
, if so can you please send the log file dbm.ebl to the mailing list or to me?
>>>>
>>>>Best regards,
>>>>Tilo
>>>>
>>>>Tilo Heinrich
>>>>Senior Developer
>>>>MaxDB&liveCache
>>>>SAP AG
>>>>http://www.sap.com <http://www.sap.com> <http://www.sap.com/ <http://www
.sap.com/> >
>>>>
>>>>Sitz der Gesellschaft/Registered Office: Walldorf, Germany
>>>>Vorstand/SAP Executive Board: Henning Kagermann (Sprecher/CEO), Shai Agassi
, L?o Apotheker, Werner Brandt, Claus Heinrich, Gerhard Oswald, Peter Zencke
>>>>Vorsitzender des Aufsichtsrats/Chairperson of the SAP Supervisory Board:
Hasso Plattner
>>>>Registergericht/Commercial Register Mannheim No HRB 350269
>>>>
>>>>Diese E-Mail kann Betriebs- oder Gesch?ftsgeheimnisse oder sonstige
vertrauliche Informationen enthalten. Sollten Sie diese E-Mail irrt?mlich
erhalten haben, ist Ihnen eine Kenntnisnahme des Inhalts, eine Vervielf?ltigung
oder Weitergabe der E-Mail ausdr?cklich untersagt. Bitte benachrichtigen Sie
uns und vernichten Sie die empfangene E-Mail. Vielen Dank.
>>>>
>>>>This e-mail may contain trade secrets or privileged, undisclosed, or
otherwise confidential information. If you have received this e-mail in error,
you are hereby notified that any review, copying, or distribution of it is
strictly prohibited. Please inform us immediately and destroy the original
transmittal. Thank you for your cooperation.
>>>>
>>>>-- --Original Message-- --
>>>>From: Frank
>>>>Sent: Dienstag, 24. Juli 2007 19:17
>>>>To: maxdb@(protected)
>>>>Subject: Re: using archive_stage und archive_stage_repeat in scripts
>>>>
>>>>Hello Tilo,
>>>>
>>>>I use the following skript for archiving (thanks for your support)
>>>>
>>>>dbmcli -u control,control -d $SID -uUTL -c <<EOF
>>>>(step-1 (See http://tep-1.ora-code.com)) archive_stage $ARCHIVE_MEDIUM $LOG_MEDIUM NOVERIFY KEEP
>>>>(step-2 (See http://tep-2.ora-code.com)) archive_stage_repeat $ARCHIVE_MEDIUM2 $LOG_MEDIUM VERIFY
>>>>EOF
>>>>
>>>>If step_1 fails and step_2 succeed I get only 1 backup and afterwards
>>>>the log wil be deleted.
>>>>
>>>>Is there any possibility to avoid this situation?
>>>>
>>>>best regards Frank
>>>
>>>
>>>
--
MaxDB Discussion Mailing List
For list archives: http://lists.mysql.com/maxdb
To unsubscribe: http://lists.mysql.com/maxdb?unsub=mysql@(protected)
|
|
|