 | | | MaxDB | | WinXP Client Win2003 Server MaxDB 7.6.00.34
SQLStudio 7.6.00.27(123692)
Hello all
I am trying to write a code that calculates the age of
an item but could not create the expected results.
I trHello Florian
don 't be worry. There is not corruption in your permanent data!
It is not necessary to run check data or something like this ...
The stackbacktrace is generated because somebody wantsHello
I am reading latest MaxDB online docs and found this
1) USE_OPEN_DIRECT
Q do you recommend this on a Linux w/kernel 2.6? which Filesystems
make sense for this parameter?
2) "Only for UNIAll
I have a quick question concerning the backup_hist_list query. I am
executing this command via dbmcli as superdba. I am getting results but
not up to the last backup which was at 7am this morning
Hello
A new version of MaxDB 7.6 documentation is available now. All the
documentation has been completely revised and two new tutorials have
been included
See the Database Administration TutoriaSolved by restarting the PC.
Regards
Martin
On 10/24/06 Martin Cordova <martin.cordova@(protected) > wrote
> >dbmcli -d prod -u dbm dbm
>
> dbmcli on prod >db_state
> ERR
> -24961 ERR_STATE The oper >dbmcli -d prod -u dbm dbm
dbmcli on prod >db_state
ERR
-24961 ERR_STATE The operational state of the database instance could
not be determined
-24994 ERR_RTE Runtime environment error
no_id_provideIs it OK to mount a partition with the "noatime " attribute and use it
to store logs or data volumes? I am using MaxDB v7.6 in case that
matters.
Thank you
Martin
--
Dinamica - RADical J2EE frameworHello List
our 7.5.00.34 instance suffers from regular B*TREE Errors.
The diagnosis file database errors show the following
2006-10-23 10 27 55 15657 ERR 53173 B*TREE NOT ftsTemp IN filetype 0Hi 2 all
what is the trick (or prerequisite?) to use the Search feature of the
MaxDB online manual
http //dev.mysql.com/doc/maxdb/en/default.htm
?
I always get the 'No Results ' page whatever I entHello
I just installed MaxDB 7.6.0.34 X86-64 on kernel 2.6.16 (opensuse
10.1) Pentium D-945 3.4Ghz +1GB RAM DDR2-667 with a RAID-0 based on
2 SATA2 disks with 16MB buffer. Experimenting with a teHallo
ich brauche wieder einmal kompetente und schnelle Hilfe um bei unserem
Umstellungsprojekt voran zu kommen
wir sind jetzt dabei unsere Datenbank mittels rpmcli von SAPDB 7.3.00.24 32
Bit Linux Hello I am experimenting with some database params and tried to
change this one
_IDXFILE_LIST_SIZE
to 16384 - but I cannot is this parameter locked? my cache_size
parameter is more than 3 times Should I set maxcpu 2 on DualCore (Pentium 945-D)? Advice welcome.
Regards
Martin
--
Dinamica - RADical J2EE framework
open source easy and powerful
http //www.martincordova.com
--
MaxDB DiscussHi
I am trying to do the following
I have two identical database instances (in two separate machines) one is
live and the other is to be a backup. I would like to write all changes in
one daHello all
In our production system we use version 7.5.0.19.
Same days ago I made an update of my development system to 7.6.0.32.
Now I got a problem with a procedure.
The procedure returns a cursor.Hello
I found these messages in knldiag. Since all my schemas on this
instance lost their indexes some time ago (I am still investigating)
I wonder if these warnings are important and if they are MaxDB 7.6.0.27 on OpenSUSE 10.0
Problem I am using this script to export a user/schema
TABLEEXTRACT USER
CATALOG OUTSTREAM '/opt/migrate/catalog.dat '
DATA OUTSTREAM '/opt/migrate/data.dat '
The On the MySQL web site it is told that MaxDB 's JDBC driver would be JDBC
compliant. In fact to fulfil this the JDBC escape syntax must be
supported. This is not the case as you easily can test
s.eHi folks
I am about to gather some countings from old data
into some tables which hold graphics information (coordinates).
For that I
(a) created some Calendar table just holding nothing else butHi all
for documentation purpose I suggested Manuel to use the COMPACT format
for
data files rather then the COMPRESSED format. The COMPACT format is a
proprietary
MaxDB Loader format that eliminateI use MaxDB Version 7.6.00.16 Build 016-123-109-428 for LINUX
In our database everyday occur deadlocks tell me how can I find
mistakes in procedures which happen deadlocks
LOCKLISTSTATISTICS
DEAI just upgraded our SAP database to Max database release level 7.6.0
build 33. I 'm seeing this message in the knldiagerr file.
2006-10-12 15 23 39 0x638 ERR 18432 MESSAGES Event log is full rcHi
I try to rebuild the maxdb-buildtools from the source and got an error
from ./configure
...
checking for gethostname in -lnsl... yes
checking for accept in -lsocket... no
checking size of C++ d
Hi All
i am using a simple program using jdbc to access the maxdb the java code is like below
public class JdbcTest {
/**
* @(protected) args
*/
public static void main(String[] args) {Hello all
I 've read the DB reference document and see "The AUTOCOMMIT mode is activated (Loader default value). " and "The Loader terminates each sql statement implicitly with a COMMIT. "
Now I needHello MaxDB users
For a test environment I backup a MaxDB 7.6 database to a filesystem. I
use a Backup Medium of
Backup Type Complete Data
Device Type File
Backup Tool None
Device/File <filesysHello Michael
SQL Studio is written in Visual Basic and pending on some 32-bit controls of Microsoft.
I have to check if these controls cause the problems with the SQLStudioDSQL on Windows Vista.
YHello
If I am tracing the JDBC Connections from a Jboss to a MaxDB 7.6 on
Win2003 I see a lot of -807 errors in the sapdb trace file directly
after a new connection is generated. This happens secondWe were on SAP DB release 7.3.3 and have upgraded the database to 7.5
and then 7.6. After each upgrade I ran a complete backup that was
consistent. Once we were done testing in 7.6. I reloaded the |
|
|
